Cross reference Parker Premium Warm Silver Grey Gold Trim Ballpoint Pen KS39 |
|---|
| No. | Brand | O.D. | I.D. | Length | End Cap | By-Pass | Adhesive | Efficiency | Media Type |
| HC9901FKS39Z | Pall | 3.74 | 2.19 | 38.82 | Epoxy Coated CS | None | Epoxy | Beta 15[c] >= 1000 (ISO 16889 & DFE) | Microglass supported both sides |
| HC9901FKS39H | Pall | 3.74 | 2.19 | 38.82 | Epoxy Coated CS | None | Epoxy | Beta 15[c] >= 1000 (ISO 16889 & DFE) | Microglass supported both sides |
| HC2019FKS39Z | Pall | 5.94 | 3.8 | 36.3 | Plastic | None | Epoxy | Beta12[c] >= 1000 (ISO 16889 & DFE) | Microglass supported both sides |
| HC2019FKS39H | Pall | 5.94 | 3.8 | 36.3 | Plastic | None | Epoxy | Beta12[c] >= 1000 (ISO 16889 & DFE) | Microglass supported both sides |
| HC9404FKS39Z | Pall | 3.85 | 2.47 | 38.1 | Plastic | None | Epoxy | Beta 12{c} >= 1000 (ISO 16889 & DFE) | Microglass supported both sides |
| HC9404FKS39H | Pall | 3.85 | 2.47 | 38.1 | Plastic | None | Epoxy | Beta 12{c} >= 1000 (ISO 16889 & DFE) | Microglass supported both sides |
| HC8304FKS39Z | Pall | 5.94 | 3.8 | 36.3 | Corrosion Resistant CS/AL | None | Epoxy | Beta 12{c} >= 1000 (ISO 16889 & DFE) | Microglass supported both sides |
| HC8304FKS39H | Pall | 5.94 | 3.8 | 36.3 | Corrosion Resistant CS/AL | None | Epoxy | Beta 12{c} >= 1000 (ISO 16889 & DFE) | Microglass supported both sides |
| HC8914FKS39Z | Pall | 3.85 | 2.47 | 38.18 | Plastic | None | Epoxy | Beta 12[c] >= 1000 (ISO 16889 & DFE) | Microglass supported both sides |
| HC8914FKS39H | Pall | 3.85 | 2.47 | 38.18 | Plastic | None | Epoxy | Beta 12[c] >= 1000 (ISO 16889 & DFE) | Microglass supported both sides |
| HC8904FKS39Z | Pall | 3.85 | 2.47 | 38.18 | Plastic | None | Epoxy | Beta 12[c] >= 1000 (ISO 16889 & DFE) | Microglass supported both sides |
| 2018 parker fountain pen for gift | Minor Diameter:45.0 LB; Integral Valve Configuration:Flange Mount; Shaft Type:Right Hand (CW); GPM @ 1,800 rpm, Cover End:2520VQ21E11-11DD20; Pump Series:2 1/2; Minor Diameter [Min:Flange; Mounting Flange:N/A; Shaft Dia.:Standard Pilot; Shaft Length:0.875 in; Pressure Port Size, Cover End:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1 3/8 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ21E11-11DD20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:31.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1 1/16 in SAE O-Ring; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.22; Displacement Shaft End (cu in/revolution):4.12; |
| Ballpoint Pen Refills for Parker Pens, Medium Point,Metal Refill -Black Ink SF019 | Manufacturer Part No.:45.0 LB; Mounting:Flange Mount; Integral Valve Configuration:Right Hand (CW); GPM @ 1,800 rpm, Shaft End:2520VQ21E11-11DD20; Port Orientation - Cover End:2 1/2; Port Size:Flange; Model No.:N/A; Seal Material:Standard Pilot; Cover End Pressure [Max:0.875 in; Spline Description:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1 3/8 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ21E11-11DD20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:31.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1 1/16 in SAE O-Ring; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.22; Displacement Shaft End (cu in/revolution):4.12; |
| 2018 China Wholesale luxury metal pen set gift box | Cover End RPM [Max:45.0 LB; Controlled Flow Rate:Flange Mount; Major Diameter [Max:Right Hand (CW); Shaft End RPM [Max:2520VQ21E11-11DD20; Relief Valve Setting:2 1/2; Cover End Pressure [Max:Flange; Seal Material:N/A; Displacement Cover End (cu in/revolution):Standard Pilot; Model No.:0.875 in; Max. RPM [Max:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1 3/8 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ21E11-11DD20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:31.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1 1/16 in SAE O-Ring; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.22; Displacement Shaft End (cu in/revolution):4.12; |
| 2017 new modle ball roller gift steel silver color pen set with gift box | Cover End Flow @ RPM:45.0 LB; Shaft End Pressure [Max:Flange Mount; Rotation:Right Hand (CW); Major Diameter [Max:2520VQ21E11-11DD20; Mounting Flange:2 1/2; Minor Diameter:Flange; Displacement Shaft End (cu in/revolution):N/A; Major Diameter [Min:Standard Pilot; Weight:0.875 in; Mounting:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1 3/8 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ21E11-11DD20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:31.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1 1/16 in SAE O-Ring; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.22; Displacement Shaft End (cu in/revolution):4.12; |
| hot selling gift pen set Baoer 508 ball pen fountain pen | Spline Description:45.0 LB; Major Diameter [Min:Flange Mount; Port Orientation - Cover End:Right Hand (CW); Pump Series:2520VQ21E11-11DD20; Pilot Type:2 1/2; Port Type:Flange; Cover End Pressure [Max:N/A; Relief Valve Setting:Standard Pilot; Cover End Flow @ RPM:0.875 in; Shaft Length:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1 3/8 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ21E11-11DD20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:31.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1 1/16 in SAE O-Ring; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.22; Displacement Shaft End (cu in/revolution):4.12; |
| Parker Hydraulic pump F11-014-HB-WV-K-000-000-0 | Cover End RPM [Max:45.0 LB; Shaft Seal Type:Flange Mount; Port Size:Right Hand (CW); Pressure Port Size, Shaft End:2520VQ21E11-11DD20; GPM @ 1,800 rpm, Cover End:2 1/2; Manufacturer Part No.:Flange; Mounting Flange:N/A; Shaft End Flow @ RPM:Standard Pilot; Minor Diameter:0.875 in; GPM @ 1,800 rpm, Shaft End:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1 3/8 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ21E11-11DD20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:31.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1 1/16 in SAE O-Ring; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.22; Displacement Shaft End (cu in/revolution):4.12; |
| plastic G2 parker refill | Shaft Key:45.0 LB; Spline Description:Flange Mount; Model No.:Right Hand (CW); GPM @ 1,800 rpm, Shaft End:2520VQ21E11-11DD20; Pilot Type:2 1/2; Cover End Flow @ RPM:Flange; Shaft End Flow @ RPM:N/A; Shaft Length:Standard Pilot; Port Orientation - Cover End:0.875 in; Mounting:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1 3/8 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ21E11-11DD20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:31.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1 1/16 in SAE O-Ring; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.22; Displacement Shaft End (cu in/revolution):4.12; |
| Parker replacement piston pump PV016R1K1T1NMMC hydraulic pump factory price in promotion | Spline Description:45.0 LB; Shaft Seal Type:Flange Mount; Shaft Key:Right Hand (CW); Manufacturer Part No.:2520VQ21E11-11DD20; Cover End Flow @ RPM:2 1/2; Port Size:Flange; Pump Series:N/A; Shaft Dia.:Standard Pilot; Shaft End Pressure [Max:0.875 in; Shaft Length:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1 3/8 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ21E11-11DD20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:31.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1 1/16 in SAE O-Ring; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.22; Displacement Shaft End (cu in/revolution):4.12; |
| New arrived 2019 luxury pen with custom logo parker pen roller pen canetas | GPM @ 1,800 rpm, Shaft End:45.0 LB; Max. RPM [Max:Flange Mount; Mounting Flange:Right Hand (CW); Minor Diameter [Max:2520VQ21E11-11DD20; Port Type:2 1/2; Cover End Pressure [Max:Flange; Pressure Port Size, Cover End:N/A; Minor Diameter:Standard Pilot; Manufacturer Part No.:0.875 in; GPM @ 1,800 rpm, Cover End:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1 3/8 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ21E11-11DD20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:31.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1 1/16 in SAE O-Ring; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.22; Displacement Shaft End (cu in/revolution):4.12; |