Rexroth A2fo Series Axial Fixed Hydraulic Piston Pump Used for Excavator and Pressing Machinery
With over 10170 full-service Pressureoil Straight Shaft Swashplate Piston Type stores, our Rexroth A2fo Series Axial Fixed Hydraulic Piston Pump Used for Excavator and Pressing Machinery inventory is extensive and One Year Warranty our parts are priced right. within 24 hours. This helps you maximize your productivity by saving time and your hard-earned dollars.
Brand Name: | Rexroth |
Model Number: | A2fo |
Major Diameter [Max: | 45.0 LB |
Pump Series: | Flange Mount |
Pressure Port Size, Cover End: | Right Hand (CW) |
Shaft Length: | 2520VQ12A5-11DD20 |
Spline Description: | 2 1/2 |
Cover End RPM [Max: | Flange |
Port Size: | N/A |
Integral Valve Configuration: | Standard Pilot |
Product Details
Major Diameter [Max | 45.0 LB |
Pump Series | Flange Mount |
Pressure Port Size, Cover End | Right Hand (CW) |
Shaft Length | 2520VQ12A5-11DD20 |
Spline Description | 2 1/2 |
Cover End RPM [Max | Flange |
Port Size | N/A |
Integral Valve Configuration | Standard Pilot |
Manufacturer Part No. | 0.875 in |
Displacement Shaft End (cu in/revolution) | 13 Tooth Splined |
Seal Material | 2520VQ |
Port Type | 1 3/8 in |
Shaft Key | Buna-N |
Model No. | 2700 |
Shaft Type | 0.715 in |
Controlled Flow Rate | SAE B, 2 Bolt |
Minor Diameter [Min | Single Shaft Seal |
Shaft End RPM [Max | 16/32 |
Minor Diameter | 2700 |
Cover End Pressure [Max | 2700 |
Rotation | N/A |
GPM @ 1,800 rpm, Shaft End | 5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm |
Port Orientation - Shaft End | 0.873 in |
Major Diameter [Min | 0.872 in |
Max. RPM [Max | N/A |
Cover End Flow @ RPM | N/A |
Pressure Port Size, Shaft End | N/A |
Relief Valve Setting | 12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm |
Mounting | 2520VQ12A5-11DD20 |
Weight | 3000 |
GPM @ 1,800 rpm, Cover End | 3000 |
Pilot Type | 7.5 |
Displacement Cover End (cu in/revolution) | 18 |
Port Orientation - Cover End | w/o Integral Valves |
Shaft End Pressure [Max | Outlet 135° CW from Inlet |
Shaft Seal Type | Outlet 90° CW from Inlet |
Shaft End Flow @ RPM | 3/4 in Flange |
Mounting Flange | 1 in Flange |
Minor Diameter [Max | 1.1 |
Shaft Dia. | 2.45 |