ISO f7 tolerance C1045 chrome plated bar
With over 10170 full-service stores, our ISO f7 tolerance C1045 chrome plated bar inventory is extensive and our parts are priced right. New Condition within 24 hours. This helps you maximize your productivity by saving time and your hard-earned dollars.
| Model Number: | f7 |
| Port Type: | 101.0 LB |
| Shaft End Flow @ RPM: | Flange Mount |
| Cover End Pressure [Max: | Right Hand (CW) |
| Mounting Flange: | 4525VQ42A17-11AA20 |
| Minor Diameter [Max: | 3 1/2 |
| Displacement Cover End (cu in/revolution): | Flange |
| Shaft Length: | N/A |
| Displacement Shaft End (cu in/revolution): | Standard Pilot |
Product Details
| Port Type | 101.0 LB |
| Shaft End Flow @ RPM | Flange Mount |
| Cover End Pressure [Max | Right Hand (CW) |
| Mounting Flange | 4525VQ42A17-11AA20 |
| Minor Diameter [Max | 3 1/2 |
| Displacement Cover End (cu in/revolution) | Flange |
| Shaft Length | N/A |
| Displacement Shaft End (cu in/revolution) | Standard Pilot |
| Minor Diameter [Min | 1.25 in |
| Shaft End Pressure [Max | 14 Tooth Splined |
| Shaft Type | 4525VQ |
| Model No. | 1 15/16 in |
| GPM @ 1,800 rpm, Cover End | Buna-N |
| Pilot Type | 2200 |
| Pump Series | 1.04 in |
| Port Orientation - Shaft End | SAE C, 2 Bolt |
| Integral Valve Configuration | Single Shaft Seal |
| Pressure Port Size, Shaft End | 12/24 |
| Port Orientation - Cover End | 2200 |
| Spline Description | 2200 |
| Minor Diameter | N/A |
| Rotation | 17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm |
| Port Size | 1.248 in |
| Cover End Flow @ RPM | 1.247 in |
| Manufacturer Part No. | N/A |
| Mounting | N/A |
| Seal Material | N/A |
| Major Diameter [Max | 42 gal/min @ 1200 rpm, 63 gal/min @ 1800 rpm |
| Major Diameter [Min | 4525VQ42A17-11AA20 |
| GPM @ 1,800 rpm, Shaft End | 3000 |
| Controlled Flow Rate | 2500 |
| Relief Valve Setting | 25.5 |
| Shaft Dia. | 63 |
| Shaft End RPM [Max | w/o Integral Valves |
| Max. RPM [Max | Outlet 135° CCW from Inlet |
| Shaft Key | Outlet Opposite Inlet |
| Shaft Seal Type | 1 in Flange |
| Pressure Port Size, Cover End | 1 1/2 in Flange |
| Cover End RPM [Max | 3.37 |
| Weight | 8.46 |