Furukawa F6 Excavator Hydraulic Hammer Breaker Part Breaker Seal Kit
How do I place an EMERGENCY order for a Furukawa F6 Excavator Hydraulic Hammer Breaker Part Breaker Seal Kit that I want to pick as Customer Request Color up at a 25-90 Shore Hardness our Hammer Hydraulic Breaker Application Product store?
| Model Number: |
F6 |
| Shaft Seal Type: |
35.0 LB |
| Max. RPM [Max: |
Flange Mount |
| Cover End Flow @ RPM: |
Right Hand (CW) |
| Shaft Type: |
V2020-1F13S6S-11AA30 |
| Shaft Key: |
2 |
| Integral Valve Configuration: |
Flange |
| Mounting Flange: |
N/A |
| Displacement Cover End (cu in/revolution): |
N/A |
Product Details
| Shaft Seal Type |
35.0 LB |
| Max. RPM [Max |
Flange Mount |
| Cover End Flow @ RPM |
Right Hand (CW) |
| Shaft Type |
V2020-1F13S6S-11AA30 |
| Shaft Key |
2 |
| Integral Valve Configuration |
Flange |
| Mounting Flange |
N/A |
| Displacement Cover End (cu in/revolution) |
N/A |
| Displacement Shaft End (cu in/revolution) |
2.6 |
| Pilot Type |
13 Tooth Splined |
| Minor Diameter |
V2020 |
| GPM @ 1,800 rpm, Shaft End |
1 5/16 in |
| Weight |
Double |
| Shaft End Pressure [Max |
Buna-N |
| Shaft Dia. |
2400 |
| Spline Description |
0.728 in |
| Controlled Flow Rate |
SAE B, 2 Bolt |
| GPM @ 1,800 rpm, Cover End |
Single Shaft Seal |
| Port Orientation - Shaft End |
16/32 |
| Mounting |
3000 |
| Port Orientation - Cover End |
2400 |
| Port Type |
N/A |
| Major Diameter [Min |
6 gal/min @ 1200 rpm, 9 gal/min @ 1800 rpm |
| Shaft End Flow @ RPM |
0.873 in |
| Model No. |
0.872 in |
| Manufacturer Part No. |
0.734 in |
| Shaft End RPM [Max |
0.723 in |
| Seal Material |
N/A |
| Pressure Port Size, Cover End |
13 gal/min @ 1200 rpm, 19.5 gal/min @ 1800 rpm |
| Relief Valve Setting |
V2020-1F13S6S-11AA30 |
| Rotation |
2500 |
| Port Size |
2200 |
| Minor Diameter [Max |
9 |
| Major Diameter [Max |
19.5 |
| Shaft Length |
N/A |
| Pressure Port Size, Shaft End |
Outlet Opposite Inlet |
| Minor Diameter [Min |
Outlet Opposite Inlet |
| Pump Series |
3/4 in SAE O-Ring |
| Cover End RPM [Max |
3/4 in SAE O-Ring |
| Cover End Pressure [Max |
1.2 |